[GranpapaTim]

I've done some research and found that 2005 mustang factory bullits are 17x8 with a 45mm offset. and a 5x4.50 or 5x114.3 pattern. And the 2006 Mercury Milan is 17x7 wheel size, with the same offset and bolt pattern. So my question is could I purchase mustang bullits and use them with the michelin tires originally equipped on milan rims.

 

[mtl1977]

The 225 tire might be a little narrow for an 8" wheel. The Mustang uses a 235 tire, so maybe it won't be so bad. The wheels should bolt up with no issues.
My Mustang uses a 245 on an 17x8 wheel.

What are you looking at? Gray Bullitts? Polished? Silver? If you are going to mess around try to get the factory 18" polished or aftermarket 20". The stock Michelins are nothing special.

 

[RedFireSEL]

Michelin's approved rim range for that tire is 6"-8" so they will fit the Mustang wheel. The wider wheel will widen the contact patch slightly.

Read this:
http://www.tirerack.com/tires/tiretech/tirespecskey.jsp#measrimwidth

 

[GranpapaTim]

Thanks for your info. This spring I will take off my 2005 mustang wheels and tires and see how it looks.

 

[Jaysen]

Yes they fit. I have done this a few times with 05 take off's

 

[xxtremeteam]

i wanted to put a set of the popular cobra the 5 spoke ones on my fusion or see a pic of how it would look?

 

[GranpapaTim]

Thanks for all the returned infomation. Come May 1st I'm going to check It out. Tim