FordFusionClub.com banner

1 - 10 of 10 Posts

·
Banned
Joined
·
1,478 Posts
Welcome!

Hope these photos help with mods..

2012 SEL V6
VG sharkfin cover
5% tint in rears, 15% up front, 70% windshield
Clear depo marker lights w/ 360 white LEDs
EVOX-R projector retrofit @ XB35 5000k pushed by 5Five ballasts (50w)
XB35 5000k bulbs in fog lights pushed by 3Five ballasts (35w)
360 LED bulbs in mirror puddle lights (no photos)
Flip key (cut free at home depot - programed at home (must have two OEM keys))











(OEM markers - ugly)

















 

·
Banned
Joined
·
1,478 Posts
Yeah.. the headlight mod is probably the most time consuming (about 4 hours total) and cost around $400 total.

But it sure is nice pulling up next to $60k+ cars and my headlights over-power theirs.. And in most cases over-powers street lights.

Otherwise, good luck and enjoy the car! They seem to be great cars (I only put 2,500 miles on mine this year..2nd spare vehicle so eh)
 

·
Registered
Joined
·
14 Posts
Discussion Starter #6
Well I got the LED license plate and puddle lights installed. The housing of the LEDs for the license plate are a little wider and rectangular and initially shorted out Fuse 22. A strip of electrical tape over the housing took care of the problem.

For under $20 total, this was a quick mod that really improves not only the look of the car but the brightness of the lights. The OEM bulbs for the puddle lights were worthless.

Photos to come at a later date. We currently are experiencing -35*F windchills...:eekcrazy:
 

·
Super Moderator
Joined
·
5,755 Posts
Hi tsquale. "Claire" looks nice and good to see you are still around. :)

Good luck!
 
1 - 10 of 10 Posts
Top