I have an 06 Zephyr & was told that I need a new trans. When the car shifts into high gear it hesitates for a few seconds. Recently it seems to throw the system out of sync, corrects itself after starting it again. Trans may be shot, have 90K miles (70K highway)...just does not make any sense because I have really taken care of the car. The (2) TSB items were never taken care of by the dealers, not sure if this may be the reason for my trans issues. thanks -
TSB 07-2-3 (Update for 06-21-11)
*Update for 06-21-11*
http://us.f13.yahoofs.com/bc/43dafb42mc9a58637/bc/Fusion+TSB+PDF+Files/tsb07-02-03+(update+for+06-21-11).pdf?BCFjkZGBHyGvsyb9
FORD: 2006-2007 Fusion
LINCOLN: 2006 Zephyr
MERCURY: 2006-2007 Milan
This article supersedes TSB 06-21-11 to update the TSB Action step.
ISSUE:
Some 2006-2007 Fusion, Milan and 2006 Zephyr vehicles built before 9/4/2006 equipped with a 3.0L engine and Aisin F21 automatic transmission may exhibit one or more of the driveability and/or transmission symptoms listed below.
Engine Driveability
Diagnostic trouble code (DTC) P0606
Powertrain lacks response
High idles after starting engine and lasting about 2 minutes
Intermittent hard to start
Transmission
Transmission shifts too early / too late / too often
Gear changes take too long to complete
Shifts rough or jerky from park
Slow downshifts
Takes too long to engage and/or hesitates while shifting from Park to Drive or Reverse
ACTION:
Reprogram the powertrain control module (PCM) and transmission control module (TCM) to the latest calibration
http://us.f13.yahoofs.com/bc/43dafb42mc9a58637/bc/Fusion+TSB+PDF+Files/tsb07-02-03+(update+for+06-21-11).pdf?BCFjkZGBHyGvsyb9
FORD: 2006-2007 Fusion
LINCOLN: 2006 Zephyr
MERCURY: 2006-2007 Milan
This article supersedes TSB 06-21-11 to update the TSB Action step.
ISSUE:
Some 2006-2007 Fusion, Milan and 2006 Zephyr vehicles built before 9/4/2006 equipped with a 3.0L engine and Aisin F21 automatic transmission may exhibit one or more of the driveability and/or transmission symptoms listed below.
Engine Driveability
Diagnostic trouble code (DTC) P0606
Powertrain lacks response
High idles after starting engine and lasting about 2 minutes
Intermittent hard to start
Transmission
Transmission shifts too early / too late / too often
Gear changes take too long to complete
Shifts rough or jerky from park
Slow downshifts
Takes too long to engage and/or hesitates while shifting from Park to Drive or Reverse
ACTION:
Reprogram the powertrain control module (PCM) and transmission control module (TCM) to the latest calibration
1 - 1 of 15 Posts
1 - 1 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
FordFusionClub.com
A forum community dedicated to Ford Fusion and all Ford vehicle owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance for the Focus, Fiesta, Taurus, Mustang and more!
Full Forum Listing
Recommended Communities
