FordFusionClub.com banner

41 - 60 of 86 Posts

·
Registered
Joined
·
292 Posts
[quote author=DamnLocust link=topic=126589.msg2746946#msg2746946 date=1226763303]
Any closer pics of the actual hood shocks and the attachment points? How long did the install take?
[/quote]

Yeah, I have a full set of installation pictures and tips/considerations/etc (applicable to my '09 MS3). I don't recall exactly how long it took to do the install, but I know it would take someone less than 15 minutes if they've done it before. It was super easy, even with the couple of hangups I had.

HINT:
On an 09 MS3, re-use your stock hardware.

I'll have the complete walkthrough posted by nightfall, AZ time.
 

·
Registered
Joined
·
83 Posts
just ordered mine, thanks~!
 

·
Registered
Joined
·
292 Posts
Thanks!

I will be doing the same for the side markers and rear LED reflectors which I hope to have installed by Thanksgiving day.

The walkthrough should be up the weekend after...Maybe.
 

·
Registered
Joined
·
590 Posts
Discussion Starter #46
[quote author=enki link=topic=126589.msg2745582#msg2745582 date=1226699661]
My hood dampers arrived today, will be installing this weekend! :D

Edit: I got a hair up my butt and installed them today. These things give some SERIOUS lift!
[/quote]

can you make more shots? we would like to ask your permission to use them for our future sales.
Thank you!
 

·
Registered
Joined
·
590 Posts
Discussion Starter #48
[quote author=enki link=topic=126589.msg2752265#msg2752265 date=1226987516]
What angles are you after?

Ask it of me, and it will be done in nice big 1600x1200 resolution.
[/quote]

thank you, waiting for your pictures
 

·
Registered
Joined
·
83 Posts
I guess mine will be shipped after 11/30, right? 7 more days....
 

·
Registered
Joined
·
590 Posts
Discussion Starter #50
[quote author=MAZINGA3 link=topic=126589.msg2766689#msg2766689 date=1227565850]
I guess mine will be shipped after 11/30, right? 7 more days....
[/quote]

I need your payment details, e-mail, address ....
 

·
Registered
Joined
·
292 Posts
[quote author=PartPlaza link=topic=126589.msg2766115#msg2766115 date=1227553240]
[quote author=enki link=topic=126589.msg2752265#msg2752265 date=1226987516]
What angles are you after?

Ask it of me, and it will be done in nice big 1600x1200 resolution.
[/quote]

thank you, waiting for your pictures
[/quote]

What, specifically, are you after? What angles?
 

·
Registered
Joined
·
83 Posts
[quote author=PartPlaza link=topic=126589.msg2766699#msg2766699 date=1227566078]
[quote author=MAZINGA3 link=topic=126589.msg2766689#msg2766689 date=1227565850]
I guess mine will be shipped after 11/30, right? 7 more days....
[/quote]

I need your payment details, e-mail, address ....
[/quote]
PM'd
 

·
Registered
Joined
·
62 Posts
Just ordered these for my sedan. Can't wait to get them installed. Although after reading that walkthrough, I'm sorta concerned about the passenger side windshield washer hose.
 

·
Registered
Joined
·
292 Posts
[quote author=j883376 link=topic=126589.msg2768298#msg2768298 date=1227632729]
Just ordered these for my sedan. Can't wait to get them installed. Although after reading that walkthrough, I'm sorta concerned about the passenger side windshield washer hose.
[/quote]

Ya know what? Don't be. I've put about 800 or so miles on the stock hose config and I think I'm going to leave it, as the washers still work perfectly and the hose looks fine. It moves itself out of the way when you close it. Minor (if any) pinching.
 

·
Registered
Joined
·
590 Posts
Discussion Starter #56
[quote author=MattJackson86 link=topic=126589.msg2775659#msg2775659 date=1227997471]
Coupon code not working? Its meant to be valid til tomorrow...
[/quote]

please try it now
 

·
Registered
Joined
·
515 Posts
Question, I have installed my dampers and they work and look great. (I'll post some pics later) But my drivers side strut seems to not be level with the passenger side. The drivers side always opens about a 1/4" more. I have tried switching the dampers and altering the location of the fender mounting location with no success. Any suggestions?? Thanks!
 

·
Registered
Joined
·
590 Posts
Discussion Starter #58
[quote author=enki link=topic=126589.msg2732687#msg2732687 date=1226256602]
[quote author=PartPlaza link=topic=126589.msg2732656#msg2732656 date=1226255471]
[quote author=enki link=topic=126589.msg2730199#msg2730199 date=1226095067]
Just ordered a set for my Speed 3.

Heres to hoping for awesome! Of course, pics will follow.
[/quote]

Please do, we're waiting for them. Can you also send them to [email protected] ?
[/quote]

Will do, as soon as they show up. I'll be taking pictures relevant to the installation process in a nice big 1600x1200 format.
[/quote]

did you get them?
 

·
Registered
Joined
·
62 Posts
[quote author=PartPlaza link=topic=126589.msg2785580#msg2785580 date=1228413011]
[quote author=enki link=topic=126589.msg2732687#msg2732687 date=1226256602]
[quote author=PartPlaza link=topic=126589.msg2732656#msg2732656 date=1226255471]
[quote author=enki link=topic=126589.msg2730199#msg2730199 date=1226095067]
Just ordered a set for my Speed 3.

Heres to hoping for awesome! Of course, pics will follow.
[/quote]

Please do, we're waiting for them. Can you also send them to [email protected] ?
[/quote]
Will do, as soon as they show up. I'll be taking pictures relevant to the installation process in a nice big 1600x1200 format.
[/quote]

did you get them?
[/quote]
I could take some pictures when I go home for the weekend.
 
41 - 60 of 86 Posts
Top