FordFusionClub.com banner
1 - 7 of 7 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
Was wondering if any-1 with the combination of the Magnaflow + 3d Carbon can speak on the end part of the installation process.. IE with stock muffler 3d site says stockers need to be extended... so i wondering if the magnaflow are long enough to accomadate the rear end part of the kit.

if the magflows need to be hacked up to entend upon installation of 3d Carbon kit..
 

·
Registered
Joined
·
1,089 Posts
I have the 3dCarbon kit, but no exhaust yet. Every prior car I've owned has had an exhaust. I'm almost liking the stock quietness.
 

·
Registered
Joined
·
440 Posts
If you had to, you could always have a local muffler shop move the tips back a little bit.
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #4 ·
so im guesssing up to this piont no-1 here has that combo yet...

i guess im invisoning then gettng the 3d installed then the muffler and from that piont seeing what has to happen...
 

·
Registered
Joined
·
1,089 Posts
From what I've heard, Magnaflow has worked closely with the 3dCarbon bodykit that was installed on the donor Fusion.
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #7 ·
south FL eh... any chance the miami area.. im in hialeah =) btw do u have any digi pic of ur ride showing the back end?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top