FordFusionClub.com banner
1 - 4 of 4 Posts

· Registered
Joined
·
423 Posts
I haven't done it on this one but if you don't see any screws,there's a good chance it just pops out with a puddy knife or a thin screw driver. I have done other Fords and alot of them are just held in with plastic tangs.Find an edge and with care just pry up slightly.If it trys to come up,lightly put more pressure on and evenly go around the unit until it pops up.Please don't use burte force.If it does not come up,look closely for screws.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top