FordFusionClub.com banner
1 - 6 of 6 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
home depot white abs plugs you need to of them,, remove symposer.... best to remove the hole intake manifold from boot pipe... remove the symposer.. the spring clip will be stuck to the rubber hose.. thats why best to remove it from the car... clean the are.. and T now, while its out of the car.. check for carbon on the valves.mine had almost none.. drop the abs plug into the hose were the symposer was.. clamp it off.. hose clamp is the best.. take hose from the firewall cut it to 3/ 4 inchs.. tap the other abs plug into it... put hose back on firewall..done,, you just saves between 45 and 75 $ happy now?
Packing materials Shipping box Health care Material property Box
Vehicle Car Hood Motor vehicle Automotive design
Hood Motor vehicle Automotive exterior Auto part Automotive design
Hood Automotive tire Motor vehicle Rim Carbon
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #5 ·
Hi ffj. I believe the OP is actually discussing removing the "Air Intake Resonator", but the language translation is a bit off. Take a look here for more information: Ford Fusion intake resonator - Google Search

There are even a few threads right here on the Ford Fusion Club which are contained in the Google results above.

Essentially, the short story would be don't do it.

Good luck.
why not? it just puts extra engine sound into the cabin.. i removed mine last week.. and nice and quite in the cabin.. and no harm to the engine or power
 
1 - 6 of 6 Posts
Top