FordFusionClub.com banner
1 - 1 of 1 Posts

·
Registered
Joined
·
476 Posts
I used to have 94 Crown Vic PI that the motor blew on (spun bearing). When I was pulling the motor i took a look at the cruise switch... it was toasted. at one point it did catch fire... there was no harness left just bare wires with no insulation going to a melted switch... butny thing is, the cruise still worked unless you hit a really big bump.

I'm glad ford is finally taking care of this.
 
1 - 1 of 1 Posts
Top