[mz6zoomzoom]

What performance parts are available for the drivetrain of the Fusion/etc? Please post only the items below, and I will add them to this list. Do not discuss them here. Also, please make sure they're ACTUALLY available, or post if they're "coming soon."

Exhaust:
Magnaflow Catback

CAI:
Steeda

Headers:
CP-E Mazda6 Headers (will fit, but require switching to a Mazda6 oil pan)

Forced Induction:

Flash:
FordChip.com
JetChips 07 2.3L/Automatic or Manual #70716
JetChips 07 3.0L/Automatic or Manual #70717
JetChips 06 2.3L/Automatic or Manual #70606
JetChips 06 3.0L Automatic or Manual #70607

Other:
K&N Filter

 

[krazykyle83]

exaust:
magnaflow cat back

http://www.magnaflow.com/02product/shopdisplayproducts.asp?SID=4Ford&zone=Sport&id=556&cat=Fusion

 

[Bob Jusnes]

we are working with BamaChips to finalize our Ford Fusion tune for the 3.0, and we will be moving to the 4 cylinder next. So far the results are suprising, we have been adapting BamaChips well developed mustang throttle specifications, with astounding results!

We are also about to start development of a CAI for the fusion 3.0, possibly with the use of an 80mm lightning MAF

And finally, we are in the testing stages for high performance brake pads and possibly and underdrive pulley.

We expect great things from the Fusion and hope you do as well!

 

[Hispeedsoldier]

K&N part numbers for 3.0

Year Model Engine Comment Product Type Part Number Description
2006 FUSION 3.0L V6 F/I All Air Filter 33-2340 NEW! Replacement Air Filter
2006 FUSION 3.0L V6 F/I All Oil Filter HP-2010 Oil Filter

 

[RoushFusion]

Jet Chips www.jetchip.com offers chips that piggy back on the pcm.

07 2.3L/Automatic or Manual #70716
07 3.0L/Automatic or Manual #70717
06 2.3L/Automatic or Manual #70606
06 3.0L Automatic or Manual #70607

 

[crystallas]

[quote author=MZ6ZoomZoom link=topic=41304.msg603563#msg603563 date=1141419076]
Headers:
CP-E Mazda6 Headers (will fit, but require switching to a Mazda6 oil pan)
[/quote]

Now I may not have browsed around to find the answer, but it might be helpful to state which sump is greater by volume. I would assume that the fusions is slightly larger if you can clear the 6s oil pan, but I haven't looked myself. So if anyone has a bit more clarification on this, it would be helpful for this shortcut thread.

 

[themason]

I contacted Injen and they showed interest in building an intake for the V6, they need a car that is local to the Ponoma, CA area, this is the site where you can find out all the details and requirements:

http://www.injen.com/docs/injen/content.asp?ct=vehiclesneeded_landing

 

[mz6zoomzoom]

I've created a page that anyone can edit in our new wiki, for this thread:

http://www.fmvperformance.com/fmvarticles/index.php/Ford_Fusion_Engine_&_Drivetrain_Parts

I encourage people to update and edit the page, and to post other new pages to our wiki.

 

[BCB1592]

SR Motor Sports Complete pulley set 2.3 and 3.0 fusions
http://www.srmotorsports.com/Ford_Fusion.html

F2 header, (they have been playing with the link to this one)
http://www.f2usa.com/index.php?main_page=product_info&products_id=225