FordFusionClub.com banner
1 - 3 of 3 Posts

·
Registered
Joined
·
509 Posts
Those wheels are 18x8.5 with a +50mm offset, so they will extend 25mm further into the wheelwell, and stick out 13mm more than the stockers. It would seem the only thing that might keep them from fitting would be the hub bore. I couldn't find any info on that.
 

·
Registered
Joined
·
619 Posts
Well there's only about 22mm clearance from the wheel to the spindle, so there might be some problems. You could always use a spacer, but then there's going to be fender rub at the back.
 
1 - 3 of 3 Posts
Top