got the rims. pics.

[Fusion720]

I bought the rims! and i got a really sweet deal $300 with tires of about 75% thread.
the rims has a few scratchs n curb rash but it still looks good

SIZE -245/35/19
OFFSET- 38
BOLT PATTERN -5X114.3


and other questions

WILL THERE BE ANY PROBLEMS WHEN THE CAR IT DROPPED?
THE DROP WILL BE ON TEIN H-TECHS SO A MILD DROP.
WILL THERE BE RUBBING OR ANY PROBLEMS?
heres some pics

[2010SEL]

It is a recommended size on the Discount Tire Direct site. That means they will fit if you use the correct wheel. 19" x 8" with 30mm to 40mm offset seem to be popular

[Fusion720]

It is a recommended size on the Discount Tire Direct site. That means they will fit if you use the correct wheel. 19" x 8" with 30mm to 40mm offset seem to be popular

hey where can you find the offset for the wheels?  it came from a 07 camry so i hope itll fit.

[nuge]

I have 245/35/20s on my car with lowering springs and it works GREAT. No rubbing at all.

[Fusion720]

I have 245/35/20s on my car with lowering springs and it works GREAT. No rubbing at all.

sweet! thanks!! hopefully i get those rims but im gunna try it on first to see how it looks

[fusionff]

hey where can you find the offset for the wheels?  it came from a 07 camry so i hope itll fit.

The offset may be stamped on the back of the rim somewhere.  The Camry's use a similar offset, so you should be OK.

[Fusion720]

hey where can you find the offset for the wheels?  it came from a 07 camry so i hope itll fit.

The offset may be stamped on the back of the rim somewhere.  The Camry's use a similar offset, so you should be OK.

thanks whats some offsets thats good for a fusion? 30 to 40? new with all these offset things.

[acedeuce802]

It depends on the width of the wheel.  Use this to figure out how much different wheels will stick out from each other (http://www.1010tires.com/WheelOffsetCalculator.asp).  My wheels are 18x8 with a +35 offset, and I wish they stuck out just a little bit more, so a 30 offset would be like perfect.  With an 8.5 inch wide wheel, you may only need a +35 to be flush.  Here is a picture with my wheel fitment.

[blackfusion06]

Only suggestion is for you to just test fit the wheels.  If they are really close to anything  on the suspension you can always get 1/8" spacers  if need be but you will also have to get the correct hubcentric rings.  I am sure the camry's hub is a different size.  i  usually find the oem wheel that is closest to the nearest suspension part and test fit that wheel.  its worth the 15 min to not have $300 paper weights.

[Fusion720]

Only suggestion is for you to just test fit the wheels.  If they are really close to anything  on the suspension you can always get 1/8" spacers  if need be but you will also have to get the correct hubcentric rings.  I am sure the camry's hub is a different size.  i  usually find the oem wheel that is closest to the nearest suspension part and test fit that wheel.  its worth the 15 min to not have $300 paper weights.

ok well ifound somemore info about these rims

245/35/r19
bolt pattern is 5x114.3
offset is 38

so would these fit on a fusion?
im going to try it on before i buy it also .\
i just wanted to double check to see if it will fit.

[2010SEL]

Only suggestion is for you to just test fit the wheels.  If they are really close to anything  on the suspension you can always get 1/8" spacers  if need be but you will also have to get the correct hubcentric rings.  I am sure the camry's hub is a different size.  i  usually find the oem wheel that is closest to the nearest suspension part and test fit that wheel.  its worth the 15 min to not have $300 paper weights.

ok well ifound somemore info about these rims

245/35/r19
bolt pattern is 5x114.3
offset is 38

so would these fit on a fusion?
im going to try it on before i buy it also .\
i just wanted to double check to see if it will fit.

Yes they will work if 2 other things are verified: Are they 8" wide wheels and is the center bore is at least 67.1mm. You should install hub centric rings if the center bore on the wheels is bigger than 67.1mm.

[Fusion720]

Only suggestion is for you to just test fit the wheels.  If they are really close to anything  on the suspension you can always get 1/8" spacers  if need be but you will also have to get the correct hubcentric rings.  I am sure the camry's hub is a different size.  i  usually find the oem wheel that is closest to the nearest suspension part and test fit that wheel.  its worth the 15 min to not have $300 paper weights.

ok well ifound somemore info about these rims

245/35/r19
bolt pattern is 5x114.3
offset is 38

so would these fit on a fusion?
im going to try it on before i buy it also .\
i just wanted to double check to see if it will fit.

Yes they will work if 2 other things are verified: Are they 8" wide wheels and is the center bore is at least 67.1mm. You should install hub centric rings if the center bore on the wheels is bigger than 67.1mm.

thanks a lot!! well yeah its  8" wide. and the center bore is 72.56. so i gues im goin to need hub centric rings. thanks to all of you guys who posted or replied to my thread!!! really helped me and im getting these rims for sure rims + casing for $300 cant go wrong with that!!!

[20louie06]

I don't think they're going to work man. The center bore on a Camry is 60.1mm

Edit: I just noticed you posted the center bore already. My bad. That's what I get for not reading everything. 

[Fusion720]

I don't think they're going to work man. The center bore on a Camry is 60.1mm

Edit: I just noticed you posted the center bore already. My bad. That's what I get for not reading everything. 

i got it!
well then im just goin to get the hubcentric rings.