Author Topic: Blank Canvas, need wheel opinion! Updated with new option on 5/27/10  (Read 868 times)

slony

  • Bicycle Rider
  • Total Posts: 8
  • Site Posts: 8
  • Transaction Count: (0)
  • Location: MN
  • Date Registered: May 19, 2010, 09:50:00 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SEL
  • Car Year: 2010
Howdy Everyone,

New to the Fusion club, and ready to rock and roll on my new 2010 SEL.  First thing I did was put the Smokestone Pin Stripe down the side to tie the exterior to the interior Smokestone leather.  Next I want to put on a new set of wheels, and I am a sucker for big 5 spoke designs.  First wheel that caught my eye was the Avenue/MKW A527, but not sure of bright chrome on the Sterling Grey exterior.  So let me know what your opinion would be on the following being put on the 2010 SEL.



Here is the blank canvas:







Thanks!

« Last Edit: May 27, 2010, 02:12:32 PM by slony »

The Only MTS

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2393
  • Site Posts: 2394
  • Transaction Count: (2)
  • Location: Hamilton, Ontario - Canada
  • Date Registered: August 27, 2008, 06:47:50 PM
  • GF has called the Fusion... Storm Trooper...
    • CarDomain Page
  • Car Make: Ford
  • Car Model: Ford Fusion SEL
  • Car Year: 2009
Re: Blank Canvas, need wheel opinions!
« Reply #1 on: May 20, 2010, 11:29:00 AM »
Not sure of bright chrome at all....

Shansen120

  • Love this Car!
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1534
  • Site Posts: 1535
  • Transaction Count: (1)
  • Location: Highland Village Texas
  • Date Registered: July 01, 2009, 11:10:37 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE
  • Car Year: 2007
Re: Blank Canvas, need wheel opinions!
« Reply #2 on: May 20, 2010, 11:33:26 AM »
Im not feeling it,
It just doesnt seem like the colors would work together...

slony

  • Bicycle Rider
  • Total Posts: 8
  • Site Posts: 8
  • Transaction Count: (0)
  • Location: MN
  • Date Registered: May 19, 2010, 09:50:00 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SEL
  • Car Year: 2010
Re: Blank Canvas, need wheel opinions!
« Reply #3 on: May 20, 2010, 11:35:19 AM »
Thanks The Only MTS and Shansen120!

I have been looking through posts on here, and other than chrome in mesh I haven't seen anyone putting on big 5 spokes all chrome.  A little worried about how it would look, but can find nothing to compare to on a Fusion to get a feel for it.  Really I see no Fusions in Sterling Grey putting wheels on anywhere so maybe if I can find someone who can use photoshop to put them on or something similar would be good.

Anyone possibly able to do that?

Thanks!
« Last Edit: May 20, 2010, 11:36:28 AM by slony »

Shansen120

  • Love this Car!
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1534
  • Site Posts: 1535
  • Transaction Count: (1)
  • Location: Highland Village Texas
  • Date Registered: July 01, 2009, 11:10:37 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #4 on: May 20, 2010, 11:46:50 AM »
Ill see what i can do, but cant promise it will look perfect

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #5 on: May 20, 2010, 11:53:57 AM »
I've got 5 spoke chrome but not nearly that big and a different color also. There is a silver/gray Fusion on here with the same wheels as mine and I think it looks great. Great is subjective of course. :lol:
« Last Edit: May 20, 2010, 11:57:15 AM by HALOREALM »
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

The Only MTS

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2393
  • Site Posts: 2394
  • Transaction Count: (2)
  • Location: Hamilton, Ontario - Canada
  • Date Registered: August 27, 2008, 06:47:50 PM
  • GF has called the Fusion... Storm Trooper...
    • CarDomain Page
  • Car Make: Ford
  • Car Model: Ford Fusion SEL
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #6 on: May 20, 2010, 11:56:18 AM »
Oh there are some hot 5 spokes on the Fusions around....  just not feeling those fat-fingered shiny ones.

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #7 on: May 20, 2010, 12:02:04 PM »
Justin, Sanddog, MRC all had a fat 5 spoke wheel. I think they were Boss wheels but.....the spoke extended out to the edge of the wheel making it really look full. I don't mind the fat spoke as much as the fat spoke with a lip. Just a personal preference but it may look great. It will hide these ugly brakes for sure or at least help.
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

cunfusion

  • Short Track Racer
  • ***
  • Total Posts: 229
  • Site Posts: 227
  • Transaction Count: (1)
  • Location: Lafayette Indiana 47909
  • Date Registered: July 16, 2009, 07:00:08 PM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #8 on: May 20, 2010, 12:44:41 PM »
these are the rims id like to get but have no money right now for new rims!!!!
not that theyd probably fit anyways!!! hahahaha but they would look amazing!!!!
« Last Edit: May 20, 2010, 12:46:39 PM by cunfusion »

Eibach pro kit  l   tinted windows  l  Magnaflow muffler with 4 inch custom tips   l   Steeda CAI    l    Steeda throttlebody spacer   l   SCT tuner with 93 oct tune  l  19x8  Privat Netz

The Only MTS

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2393
  • Site Posts: 2394
  • Transaction Count: (2)
  • Location: Hamilton, Ontario - Canada
  • Date Registered: August 27, 2008, 06:47:50 PM
  • GF has called the Fusion... Storm Trooper...
    • CarDomain Page
  • Car Make: Ford
  • Car Model: Ford Fusion SEL
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #9 on: May 20, 2010, 12:53:06 PM »
Now those are HOT.

Shansen120

  • Love this Car!
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1534
  • Site Posts: 1535
  • Transaction Count: (1)
  • Location: Highland Village Texas
  • Date Registered: July 01, 2009, 11:10:37 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #10 on: May 20, 2010, 12:59:20 PM »
I agree with that, cunfusion those are sick!
that deep dish looks amazing!

slony

  • Bicycle Rider
  • Total Posts: 8
  • Site Posts: 8
  • Transaction Count: (0)
  • Location: MN
  • Date Registered: May 19, 2010, 09:50:00 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SEL
  • Car Year: 2010
Re: Blank Canvas, need wheel opinion!
« Reply #11 on: May 20, 2010, 01:34:25 PM »
So far no one is thinking these will look good, guess I will wait and see if someone later will chime in maybe with some pics of big 5 spoke chromes on a Fusion.  I will keep scouring posts in the wheels/tires forums to see if I can find anything remotely close.  Maybe get to a local customizing shop and see if they have anything close to throw on for looks.

Thanks for all the replies, but keep them coming if you have a pic would love to see them.

Shansen120

  • Love this Car!
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1534
  • Site Posts: 1535
  • Transaction Count: (1)
  • Location: Highland Village Texas
  • Date Registered: July 01, 2009, 11:10:37 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #12 on: May 20, 2010, 02:09:07 PM »
I think you will find that the majority of us are not into the big chrome rims,
but hey is personal preference, and if you like them then thats what you should think about it.
Dont always go off of everyone elses opinions, when you like what you did or want

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #13 on: May 20, 2010, 02:13:25 PM »
Here is a 5 spoke chrome but about half as wide as what you are looking at. I likes the chrome.
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

fatabbot

  • President & CEO, Bro, Inc.
  • FMVmoderator
  • F1 Driver
  • *
  • Total Posts: 10943
  • Site Posts: 10944
  • Transaction Count: (2)
  • Location: Morningwood Apts, Texas
  • Date Registered: July 21, 2007, 10:24:47 PM
  • Car Make: Other
  • Car Model: Subaru Outback
  • Car Year: 2010
Re: Blank Canvas, need wheel opinion!
« Reply #14 on: May 20, 2010, 02:16:25 PM »
This is your brain:



This is your brain on chrome:



Any questions?





Before anyone's feelings get hurt, I'm just kidding.  I despise chrome, but I realize that other people like different things.  In the end, just buy the rims that you want  :)
No, we must continue on with the vaginal bleeding seminar.

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #15 on: May 20, 2010, 02:18:31 PM »
This is your brain:



This is your brain on chrome:



Any questions?





Before anyone's feelings get hurt, I'm just kidding.  I despise chrome, but I realize that other people like different things.  In the end, just buy the rims that you want  :)


Remind me to kill you later.
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

The Only MTS

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2393
  • Site Posts: 2394
  • Transaction Count: (2)
  • Location: Hamilton, Ontario - Canada
  • Date Registered: August 27, 2008, 06:47:50 PM
  • GF has called the Fusion... Storm Trooper...
    • CarDomain Page
  • Car Make: Ford
  • Car Model: Ford Fusion SEL
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #16 on: May 20, 2010, 02:39:55 PM »
Bahahahaha....  chrome was hot 50s until end of 70s on cars...  was really chrome then too. 

fatabbot

  • President & CEO, Bro, Inc.
  • FMVmoderator
  • F1 Driver
  • *
  • Total Posts: 10943
  • Site Posts: 10944
  • Transaction Count: (2)
  • Location: Morningwood Apts, Texas
  • Date Registered: July 21, 2007, 10:24:47 PM
  • Car Make: Other
  • Car Model: Subaru Outback
  • Car Year: 2010
Re: Blank Canvas, need wheel opinion!
« Reply #17 on: May 20, 2010, 02:43:10 PM »
Remind me to kill you later.

I made you hungry for eggs, didn't I?

:lol:

Oh, and thanks for the new sig.  :lol:
« Last Edit: May 20, 2010, 02:45:36 PM by fatabbot »
No, we must continue on with the vaginal bleeding seminar.

cunfusion

  • Short Track Racer
  • ***
  • Total Posts: 229
  • Site Posts: 227
  • Transaction Count: (1)
  • Location: Lafayette Indiana 47909
  • Date Registered: July 16, 2009, 07:00:08 PM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #18 on: May 20, 2010, 02:50:09 PM »
I cant say much,.... im getting a deal on some 20x8 chrome lincoln mks wheels and yes I know they have to be milled down to fit!!!

Eibach pro kit  l   tinted windows  l  Magnaflow muffler with 4 inch custom tips   l   Steeda CAI    l    Steeda throttlebody spacer   l   SCT tuner with 93 oct tune  l  19x8  Privat Netz

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #19 on: May 20, 2010, 02:51:12 PM »


I made you hungry for eggs, didn't I?

:lol:

[/quote]

MMMMMMMMMMMM............eggs   :banana:
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

The Only MTS

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2393
  • Site Posts: 2394
  • Transaction Count: (2)
  • Location: Hamilton, Ontario - Canada
  • Date Registered: August 27, 2008, 06:47:50 PM
  • GF has called the Fusion... Storm Trooper...
    • CarDomain Page
  • Car Make: Ford
  • Car Model: Ford Fusion SEL
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #20 on: May 20, 2010, 02:52:29 PM »
I cant say much,.... im getting a deal on some 20x8 chrome lincoln mks wheels and yes I know they have to be milled down to fit!!!


What are you doing with your Netz?

20louie06

  • Just modding away.
  • Senior Member
  • Le Mans: Prototype Class
  • *
  • Total Posts: 2482
  • Site Posts: 2481
  • Transaction Count: (8)
  • Location: Tulare, CA
  • Date Registered: May 04, 2008, 12:54:44 AM
  • FFC Badge #006
    • Twitter
  • Car Make: Ford
  • Car Model: SE V6 Tungsten Silver
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #21 on: May 20, 2010, 04:16:25 PM »
Confusion, those wheels are hot. I've wondered how much it would be to add a lip to my wheels, just the rear ones.

Slony, my wheels look like chrome from a distance but it's actually polished aluminum. I think they look okay.
Don't rush into getting wheels just so you can say you have them. 

If everything is under control, you're not going fast enough. 
My Mod Thread
October 2nd, 2010 SoCal Meet

acedeuce802

  • Tein Clubmember
  • Le Mans: GT Class
  • *****
  • Total Posts: 960
  • Site Posts: 945
  • Transaction Count: (2)
  • Location: Ann Arbor, Michigan
  • Date Registered: August 24, 2009, 09:29:34 PM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE 4cyl stick
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #22 on: May 20, 2010, 04:17:35 PM »
I agree with the rest of the bunch here, but that is my personal opinion.  If you like those wheels, and think they would look good on your car, I would try to find a site like this (http://www.andysautosport.com/wheels/ford_fusion.html) and if you really think that they would look the best then go for it, don't let others make you decision, but if you go with these and post pics on ffc, be prepared to take some criticism LOL :lol: just make sure you are absolutely sure you like those wheels before you pull the trigger.

s351saleen06

  • Go-Kart Driver
  • **
  • Total Posts: 96
  • Site Posts: 96
  • Transaction Count: (1)
  • Location: san marcos, tx
  • Date Registered: August 30, 2009, 11:16:24 PM
  • FMVenthusiast
    • Car Domain
  • Car Make: Ford
  • Car Model: Black SE v6
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion!
« Reply #23 on: May 20, 2010, 10:52:00 PM »
I would try to photoshop them on to get a good idea but ultimately if you like them, go for it! I posted my rims on a thread like this and 9 out of 10 people said they hated them... but I love them!

HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #24 on: May 20, 2010, 10:55:36 PM »
I would try to photoshop them on to get a good idea but ultimately if you like them, go for it! I posted my rims on a thread like this and 9 out of 10 people said they hated them... but I love them!

Yep, I remember that. And if your gonna follow the crowd, how will yours be any different. Chrome? hell yes chrome. Why? because it ain't what everybody else is doing. Get what ya like I say.
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

mayo68

  • Short Track Racer
  • ***
  • Total Posts: 127
  • Site Posts: 128
  • Transaction Count: (0)
  • Location: wv
  • Date Registered: August 04, 2008, 11:41:27 PM
  • Car Make: Ford
  • Car Model: Fusion Sel sotaBlue suede SAP
  • Car Year: 2009
Re: Blank Canvas, need wheel opinion!
« Reply #25 on: May 21, 2010, 09:25:06 AM »
There's chrome....and then there is hyperblack chrome  :)
Grey would be the right color to start with I would think.

http://www.1010tires.com/images/wheels/super/5zigen_sportengine_hybl_lg_super.jpg

Someone step up...daddy needs a GP!
09 Fusion Sel / Sport Blue / Blue suede SAP / Moon & Tune / Milan swap / smoked corners / legal tint / magnaflow catback...if it ain't sota, its yesterday's news!

slony

  • Bicycle Rider
  • Total Posts: 8
  • Site Posts: 8
  • Transaction Count: (0)
  • Location: MN
  • Date Registered: May 19, 2010, 09:50:00 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SEL
  • Car Year: 2010
Re: Blank Canvas, need wheel opinion!
« Reply #26 on: May 21, 2010, 12:33:26 PM »
Thanks for all the input everyone, and believe me I don't take this decision or any decision lightly.  I have been known to take a month to decide on a new shoe for my feet, not going to rush the decision for the Fusions new shoes.  I like the chrome, and I guess I was just hoping to get some pictures out of the group with big fat 5 spokes on.  I am going to a local shop this weekend to see if they can find something close to throw on for looks.  I will take the camera and let you know what they look like if they have them.


HALOREALM

  • Le Mans: GT Class
  • *****
  • Total Posts: 886
  • Site Posts: 886
  • Transaction Count: (2)
  • Location: Tennessee
  • Date Registered: June 29, 2007, 11:36:34 PM
  • Car Make: Ford
  • Car Model: SEL V6 Merlot/Camel Leather
  • Car Year: 2006
Re: Blank Canvas, need wheel opinion!
« Reply #27 on: May 21, 2010, 12:36:42 PM »
Thanks for all the input everyone, and believe me I don't take this decision or any decision lightly.  I have been known to take a month to decide on a new shoe for my feet, not going to rush the decision for the Fusions new shoes.  I like the chrome, and I guess I was just hoping to get some pictures out of the group with big fat 5 spokes on.  I am going to a local shop this weekend to see if they can find something close to throw on for looks.  I will take the camera and let you know what they look like if they have them.

Right. Get what you like because everything else is just preference and opinion.
It takes more torque to remove a Ford lug nut than your ricer piece of shit makes.

Build Date 9/9/05 #298
Etched Glass-Eibach Springs-Magnaflow mufflers-18" Sport Edition KV5 wheels-Kuhmo 225/45/18-DRT drilled/slotted rotors-Flex Shift Knob-Embroidered Fusion Floor Mats--Ford safety & security package

slony

  • Bicycle Rider
  • Total Posts: 8
  • Site Posts: 8
  • Transaction Count: (0)
  • Location: MN
  • Date Registered: May 19, 2010, 09:50:00 AM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SEL
  • Car Year: 2010
Re: Blank Canvas, need wheel opinion!
« Reply #28 on: May 27, 2010, 02:08:02 PM »
So I did get to see something simliar to the first wheels on my fusion, and everyone was close.  While not completely horrible it just wasn't right with the fat 5 spokes, and the bright chrome.  Didn't take pictures because I forgot my camera and had to drive about 90 miles to a custom shop to see them.  So been looking around and I like the look of the following AR Villians, how do you think they would look?



Thanks!

acedeuce802

  • Tein Clubmember
  • Le Mans: GT Class
  • *****
  • Total Posts: 960
  • Site Posts: 945
  • Transaction Count: (2)
  • Location: Ann Arbor, Michigan
  • Date Registered: August 24, 2009, 09:29:34 PM
  • FMVenthusiast
  • Car Make: Ford
  • Car Model: Fusion SE 4cyl stick
  • Car Year: 2007
Re: Blank Canvas, need wheel opinion! Updated with new option on 5/27/10
« Reply #29 on: May 27, 2010, 02:14:38 PM »
I think those would look good :) what size would you go with?