so i found this 1982 mercury zephyr in town locally to me and me and my dad are picking it up tomorrow for purchase.
its got all kinds of new parts about $600 worth
2.3l auto with 41,000 ORGINAL miles
The Plane:
5.0L
5 speed
9'' rear end idk gears
satin black body with gloss black top
black chrome all the chrome
5 lug conversion
nice wheels
tint
and im going to try and talk my dad into putting twin turbos in it next winter.
A 8.8 31 spline can handle quite a bit of power... just saying. Throw some 35 spline axle shafts in there... still cheaper than a 9" and you won't have to custom fab anything.
Just saw the ford equivalent on "fast and loud" the other week. Except it was a coupe. Evidently they are also a fox body unibody so most mustang parts will bolt on including the 5 lug conversion kits. If your making power that is a necessary upgrade along with a 31 spline 8.8 (3:73) and a Detroit air locker.
97 was a split year for the gt40/gt40p heads in the explorer. whether or not gt40p heads are better than gt40, everyone will tell you something different. gt40p are supposed to flow a little better, and give a slightly higher compression ratio, but they dont work with with all headers due to the spark plug placement, and you need to change the valve springs for them to work (but if your doing a cam anyway this doesnt matter). gt40 heads have a bigger exhaust valve.
if it was me, i would just look for a cobra motor to start with. already has gt40 heads as a base. then upgrade to aluminum heads. unless you get a killer deal on gt40/gt40p heads, your money is better spent on aluminum heads after you factor in the cost of rebuilding them and the gains you get. but thats just my take on it.
So this afternoon I wired up blue leds inside the dash to light up the gauges better because the orginal lights just didn't light it up enough. ill post a pic when I get them up
Sent from my SGH-T839 using AutoGuide.Com Free App
Not yet. Still trying to get the funds up to purchase it all. I wanna do the complete driveline swap at once so I wanna get everything I need before I tackle it.
Sent from my SGH-T839 using AutoGuide.Com Free App
little update on the zephyr:
i added a radio and speakers since the car came with stock was a a\m radio with a single speaker in the dash i put 2 6x9s and 2 5 1/2s in the rear deck lid
im waiting on carpet for the rear deck lid that i made becausei dont want to cut any interior parts.
tomorrow i got a new radiatorim going to put in because this one looks like its the orginal rad.
so well i was replaceingthe radiator last night justthe ittle movement of looseningthe trans coolers they started leaking. so now i got the car on jackstands and im running new trans line. this is goingto be fun. :/ and after work today im going to finish the radio install and finish the trans lne and bleed the cooling system. them i also picked up a set of gauges i got volts coolant temp and oil pressure. now i just gotta find a coolant port i can tap into and a oil pressure port i can tap in as well.
ill have pics up today after i get off work. finished the rad, Radio, and trans lines last night. now i gotta se up the gauges. but first i gotta locate the oil pressure switch and coolant temp sensor. then im going to run a electric fan to a switch.
lots of work to the zephyr. within the next week or 2 ill be doing a trans crossmember as well to prepair for the swap.
oh and the fuzzy carpet is glued and stapled to the new rear deck.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
FordFusionClub.com
1.6M posts
244.7K members
Since 2000
A forum community dedicated to Ford Fusion and all Ford vehicle owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance for the Focus, Fiesta, Taurus, Mustang and more!